Which IP address does this page show when a VPN connection is on?

When a VPN connection is on and the browser sends its traffic through it, this page shows the public IP address of the VPN service’s exit node. It does not show your home router’s internet-side address at that moment.

What changes on the path

Without a VPN, the request goes from the device to the home router and then into the provider’s network. The page sees the public address the provider assigned to that connection. A phone, a computer and a TV on the same home network usually see the same number. The post on which device’s address this page shows explains that in more detail.

With a VPN, the device encrypts the traffic and sends it to a VPN server first. From there the request continues to this page. A web server sees the other end of the connection, so it sees the VPN server’s public address, not your home router’s. The private address at home, such as 192.168.1.24, does not change, and this page does not show it while the VPN is on either.

The router still has its own internet-side address. Your provider can see that, because the device reaches the VPN server through the provider’s network. This page cannot see that address, because the request arrives from the VPN server.

When the address does not change

Turning a VPN on does not by itself mean that every packet goes through the tunnel.

  • Split tunnel. Some VPN apps leave the browser, or local addresses, outside the tunnel. If this page is one of the exceptions, the home public address stays on screen.
  • The VPN is on another device. An app on the phone does not change the laptop’s address. If the tunnel is set up on the router, every device behind that router shows the exit node’s address.
  • The connection did not come up. If the app cannot reach a VPN server and lets traffic go out directly, the page still shows the home public address. Check whether the app itself says the tunnel is up.
  • Only IPv4 is inside the tunnel. If the device also has IPv6 and the VPN does not cover it, the page may show an IPv6 address that belongs to your own connection. The page displays the address the request arrived on.

What that address says

An exit-node address reveals about as much as any other public address: a provider and a rough region. The region is the node’s, often another country, not your home. Many VPN users usually share the same node, so the address does not say who you are. The limits are set out in the post on what a stranger can learn from an IP address.

A VPN hides the home public address from this page and from other websites. It does not hide you from the VPN service itself: that service can see which connection the tunnel started from.

How to check

  1. Open the home page and note the address on screen.
  2. Turn the VPN on and reload the page.
  3. The address should change to the exit node’s.
  4. Turn the VPN off and reload once more. The home public address should come back.

If the number does not change at the second step, this page’s request is not going through the tunnel. The usual reason is one of the exceptions above, not that the page somehow ignores the VPN.

Back to the blog